Installation Guide
A guide to installing your Roof Safety Markers
Tube Clamp
Release worm clamp, wrap around pipe, then tighten worm clamp and insert marker.
Universal Bracket
Screw Universal Bracket* onto surface with provided self-drilling screws, slightly squeeze two opposing flaps insert marker, release. Do not over squeeze the flaps.
L-Clamp
Attach clamp (see notes below) to the object to be marked Insert one ear clamp up a marker and hold Insert the marker into two of the holes while keeping the ear clamp on top of the clamp Insert another ear clamp from the bottom of the marker Pinch each ear clamp to tighten and keep marker up and straight.
Metal Roof Marker
Place metal marker holder on roof rib. Screw in provided stitch metal screws with washers (provided).
Roof Drain Marker (side Application)
You may use the Universal Bracket with toggle bolts (provided) to effectively mark all roof drains.
Roof Drain Marker (top Application)
You may use the Metal Roof Marker with the toggle bolts (provided) to effectively mark all roof drains with ribs on the top.
